ZMACS

Topic	Replies	Views	Activity
Amp Volume affecting overall volume with ZMACS and PS2a	2	14	March 26, 2025
PS-100 control through Zmacs question	1	18	March 25, 2025
Can I use ZMACS with the Cyclops for 4 amps + preamp setup?	16	231	March 9, 2025
Silent Mode direct recording with ZMACS and PS-100	1	30	March 2, 2025
ZMACS Daisy Chaining and MIDI Control of Multiple ZMACS	4	40	February 27, 2025
ZMACS MIDI Control working well	1	20	February 24, 2025
Could ZMACS facilitate PS100 self attenuation?	0	44	February 22, 2025
Can I play two amps at the same time from ZMACS	1	41	February 18, 2025
ZMACS - Power Up/Off and Bypass Override Mode Question	12	154	February 18, 2025
Question About Z-Macs Routing and Multiple Amp Heads	2	66	January 30, 2025
ZMACS Midi Control	6	123	January 28, 2025
ZMACS - PS-100 question	5	121	January 15, 2025
Can't get midi to work + phantom power question	6	34	January 21, 2025
Boost pedals in to ZMAC/PS100 ZMACS , PS-100	5	37	January 14, 2025
Is it possible to connect the PS-2 as a power amp AND as an attenuator to the ZMACS? PS-2	2	93	January 14, 2025
Zmacs MIDI control using a Matthews Futurist controller	1	41	January 8, 2025
Possible to use one of the attenuator loops for FX? also when using 2 cabs do we need to adjust amp ohm settings? ZMACS	1	40	January 8, 2025
ZMACS Speaker Output with Amps Powered Off?	0	50	January 1, 2025
A few questions after reading the manual	11	246	December 20, 2024
ZMACS: Linking and total amps available when daisy chaining	3	78	December 19, 2024
Zmacs multiple cabs	1	90	December 4, 2024
ZMACS, PS-100, confirm impedance matching function	1	94	October 21, 2024
ZMACS, multiple attenuators, and Cyclops questions	3	121	October 1, 2024
Zmacs + ps + pl-ir	6	66	October 1, 2024
ZMACS, PS-100, and Axe FX 3	4	100	September 7, 2024
Safety functions	3	87	August 30, 2024
4 Cable Method Connections	4	179	August 25, 2024