ZMACS and channel switching

I use the ZMACS to switch between 2 heads with 1 cab, so I’m able to use the quick switch. I’m using the remote jack to channel switch one of the heads. Is there a way to hook it up to channel switch on both heads?

You would need a box to isolate the footswitch jacks of both amps to avoid ground loops and protect the amps against damage caused by incompatible switching circuitry.

I don’t see anything on the market that would do that using the ZMACS remote jack.

However, Voodoo Lab offers a simple controller that will work using MIDI. This is how I would do it:

Dave

1 Like