PS100+Cyclops+Lxii for W/D/W

[dan]

Hi Worsley,

This might be a good starting point

Can I use a Power Station in a wet-dry-wet rig?

Yes, within a certain context… a wet dry wet rig is typically a center dry sound and then stereo left and right with effects. You have three cabinets, one head, and a stereo power amp. The center is usually the cabinet that’s powered by the head and then you take a line out off the head run that into a stereo effects processor and then the outputs of that into a stereo power amp and the outputs of that into two cabs: that’s your wet-dry-wet, your three sound sources. If that’s too loud, then y…

The main issue is that wet-dry-wet requires three power amplifiers, and you only have one PS-100.

I think this is the best way to do it:

PS-100 in W/D/W - Main Amp Volume no longer controls Wet cabs

Hey @edcavllo welcome to the community ! You might be tempted to try this… but it won’t work becasuse the PS Line Out signal derived directly from your Amp head. [Wet Dry Wet with Power Stastion.drawio] What you need is all cab. volumes to be controlled by a single volume knob: the Power Station’s output volume. [Wet Dry Wet with Power Station 2.drawio] Regards, Dan

Regards,

Dan