GDPI/IR Dynamics function

[nmalexandersen]

Hello all. The small led for the Dynamics function is lightning up in both Normal and Ext. Amp modes. Is The Dynamics function a part of the External Amp signal path ?

Kind regards Nils.

[dan]

Hi Nils

Take a look at this for post

GPDI/IR Signal Path with External Amp

Hopefully this will help rig builders understand a bit more about how to integrate their GPDI/IR with external amplifiers. Any requests, let me know. Normal Mode In normal mode you hear the GPDI preamp going into your amp’s power amp and then to your amp’s speaker. Note that all the usual outputs from the GPDI/IR are still available to you if you wish to use them. This is similar to “Add a channel” in Synergy’s products. [GPDI-IR Rev3-NORMAL-MODE] External Amp Mode In external amp mode the G…

Sag is derived from the input stage so that’s why it is reacting. But your right, when in external amp mode this will not effect the sound coming from your amp.

However, notice that all GPDI/IR outputs still remain available to use and those will be sagged.