I see a lot of people asking about/wanting a footswitch replacement for their Ultra Lead. I have one for my amp that I don’t use as I’ve hooked my amp to amp switchers controlled by MIDI. I just adapted a DIN plug, which I believe is a 6 pin to multiple 1/4” latching switch to ground switchers (ie Voodoo Lab Control Switcher) and it worked out perfectly. Just another option to throw out
Hey, would you mind providing more details on which pins on the DIN you connected to which wires on the 1/4" cables?
Yeah when I get home tonight I’ll take a look for you
1 Like
Any luck checking the connections on that cable you made? I tried making my own but can’t get it to change channels on the amp for the life of me.
Edit: nm I figured it out. Centre PIN is ground and must be wired to Sleeve and shielding. Then wire PIN 3 (clockwise) and PIN 4 to Tip or Ring and you can change between Clean, Rhythm and Lead. PINs 1 & 5 are either boost or eq, I didn’t wire them up as I’m just going to leave them on all the time.