Sig X DIN cable

General
1

Hi !

I’m building a custom cable to activate the Lead, Rhythm, Clean and Boost functions on the Sig X. This cable is made with a 6-pin DIN connector. Does anyone know which pin controls which parameters? The controller device is a Gig Rig G2, which has two TRS outputs for Remote 1/2, 3/4.

I would like to confirm what each pin controls on the Sig X before wiring the other side of the cable.

Thanks

Marc-Antoine

2

Hi Marc-Antoine welcome to the forum!

I don’t have access to the engineering information for the SigX, so it might be case of trial and error to figure this out. Sorry :frowning:

3

Here you go.

SigX_FS_Pinout.pdf (24.5 KB)

Please note the comment about the ground pin.

Dave.

1 Like