Hi my name Is Luca and write from Italy. I wanted to ask if with the PS2a I can connect the line out to my sound card for recording and at the same time have the speaker cabinet connected to the amplifier to listen to my sound from that and not from the monitors (the PS2 set to ON + Operate mode). Thanks.
1 Like
Hi @Luca87 benvenuti nel forum (e saluti da Lucca 
)
Would you like to do silent recording?
Yes, the Line Out is always active, it is even active with the power off to the unit. So you can always access your amp’s raw sounds before the speaker. This will need an IR or speaker simulation applied to sound good.
Here is an example of silent recording mode:
Let me know if that answers your question or not.
Ciao Dan !!! Please specify if I can take the signal from the line out and send it to my DAW with an IR to record and simultaneously have the speaker connected and play normally. I like the result of the cab sims, but while I play I prefer to listen to myself through the 4*12 speaker rather than the monitors.
Cheers from Italy 
Yes! The line out will always work
thanks dan now everything is clear… I will use it this way!