Ps2a humming when on operate mode

Hello people
I have a ps2a which i love using , but lately it developed a problem when on operate mode
There is a low frequency hum that comes in when the ps2a goes from bypass to operate. If i connect an amp head, there is a sound coming out but on the background the hum doesn’t go away. The hum isnt affected by any changes is presence,volume, ground lift etc. i have checked the tubes, the fuzes, changed outlets , cables. Nothing seems wrong. Could this be just a bad tube( i havent try to replace the tubes yet, just re-insert them ) or something more serious?
Thanks everyone in advance

I found this forum while Google searching why my fryette ps-2a has a loud hum when I put it in operate. It didn’t use to hum this loud so maybe it’s tubes but then I see it’s common issue.

I’m currently using it to power a 2nd cab in stereo coming off the right channel of a multi effects so no amp connected to it. Neither my Synergy Syn 50 or EVH 5150 stealth hum anything near this loud. I seen another thread on this forum where several people overseas were having the same issue and they weren’t getting very far with Fryette staff responses. Fryette needs to quit pretending this isn’t a real issue with so many people experiencing it! I’m in California so my unit is a USA version. To be honest I was pretty discouraged with the replies from Fryette staff I seen in the other thread regarding this hum issue

I would have responded to that thread but it’s from last year and it’s closed.

Hi, I have a ps100 (European version 230v) with exactly the same issue - hum at 150hz


(and 50hz) which is ~15db louder than the noise coming from my old cheap amp. When connected to a 412 cab the ps100 (at zero volume with no amp connected) is generating a level of noise similar to a kitchen refrigerator in the middle of a room. I’ve done all the same extensive measurements, which other users from closed threads have done, can post them here when my newcomer limits expire. But I think it would be a waste of time - the problem is already well known and well documented, it’s at least 2 years old. But Fryette has not come up with a solution and the units which were returned to them by Thomann came back as ‘normal’. Discussions with support tend to simply dissipate over time and the problem continues to be ignored.

By now I’m pretty sure the reason is magnetic interference, which stems from transformers being too close to each other / on the same axis. This is either a major design flaw, or some parts of the chain are of a lower quality (transformers’ wiring having low copper content or whatever). I took my ps100 to a qualified tech and the hum goes away when one of the transformers is moved like pictured above. And this coinsides with the earlier findings that hum gets quieter once the lid is removed from the unit.

To be honest I’m quite shocked that this stuff is continuing to be sold with these issues like business as usual. All the bloggers are singing serenades to PS, no issues mentioned anywhere, Tim Pierce, greatest invention - the public image bar is raised so high that it’s hard to believe we have to deal with such issues.

@Beggart7 @Bas_oikn

Thank you alexey for all the information.
I am gonna send it back to thomann hoping for any kind of solution. The weird thing is that i have been using it for almost 2 years without any problems whatsoever ( and not even heavy use, I mostly play at home) and the noise came some weeks ago out of nowhere.

Hi, thanks for the reply!

It would be useful to make sure that we are talking about the same thing first, because there may be different kinds of hum. And depending on the outcome, it may give us all a glimpse of hope or not ))

The hum which my ps100 (bought at Thomann a few months ago, 230v version) generates sounds like this (first I switch the device On, fan starts; then the 2nd click - Operate mode and the hum begins).

On a spectrum analyser it looks like this - hum peaks at 50hz and 150hz, which coinsides with the mains frequency and its 3rd harmonic. 20-30db of extra hum on top of the Bypass mode level (silence & fan). The noise is coming out of the speakers, not the body of the unit, it’s not mechanical. The hum is quieter with the lid taken off and in a self-attenuation mode.

The hum from ps100 is ~10bd louder than the noise coming from my old cheap marshall jtm60 amp. Which by any standards is NOT a studio grade level, especially for a device designed to make things quieter and deliver ‘whisper level’ comfort. GPDI/IR at noon, for example, is dead quiet in my set up (purple line).

Here is a video of my testing (not very audible without headphones, but can be clearly seen on the spectrum analyser).

This hum can be heard in this video of another user (which is not mine, but demonstrates the same thing. It’s originally about the noisy fan, which you hear first, but then you can hear the hum too, when it’s switched into the Operate mode)

@Bas_oikn does your device make this kind of hum (when switching from Bypass to Operate)? And most importantly, the same device was not making such noise until recently (i. e. it can work quietly and I assume therefore can be repaired)?

Thanks again!
Alexey

Closed this thread, as the discussion has been had else were on the forum and we don’t want duplicates, please read Dave’s comment here: Power Station PS-2A hum - #87 by DavidPhelge