Hi, just bought a new PS100 and it stays at the same amp volume even when set to operate mode. Sound is coming through but no response on any of the ps100 controls. I’ve heard there was a bad batch of tubes but need to find out if it’s covered under warranty before sending it back to American Music Supply (AMS).
Welcome to the forum hobo!
Please provide the unit serial number and a complete description of your setup. That’ll help us troubleshoot.
Meanwhile, if it was a power tube issue, there would be no sound in Operate mode, so this may just be a simple case of user error.
Dave
Hi Dave, the serial number is PHID244094
Im running from my Lead 55 Germino amp head (8 ohm output) to the amp in of the Fryette, which is also set to 8 ohms. Then from the speaker out of the Fryette, which is set at 8 ohms, to the Germino 2x12 cabinet which is a 8 ohm cabinet. Ive used a Fryette PS100 many times in the past, with no issues, so I’m very familiar with these. The tubes aren’t lighting up at all and the fan isn’t coming on. The selector switch light doesn’t come on when unit is in operate mode and when using the select switch.
OK, I see.
Send your name, address, phone and date of purchase to support@fryette.com.
We’ll either arrange a local shop to address this or get you an RMA to send it to the factory.
Thanks,
Dave