My modeller gives a very low level when connected to Power Station Line In, how can I fix that?

There are typically two import line levels when dealing with guitar gear:

Level Voltage dBu
Instrument 77.5 mV RMS -20 dBu
Line 1.23 V RMS +4 dBu

Instrument level is the approximate level produced by guitar pickups (this can vary greatly, so treat this as a ballpark figure).

Line level is the voltage that an output should generate so that it can connect to an input with the highest fidelity (there is a bit more to it that that but let’s just stick with levels for now).

The Power Station Line In is designed to work with line-level signals.

When using a modeller connected to the Line In ensure that it is not outputting an instrument-level signal.