Foot Controller for Cyclops

Stage & Studio Cyclops
1

Hey Guys,

I’m trying to get a foot switch that will work with my Cyclops. I’ve tried my Saturn Works single latching switch and my Friedman single latching switch for my JJ Junior. However, neither will work and I can’t figure out why?

Thanks!!

2

Welcome to the forum!

It could be that the footsdwitches you are using have an LED accompanied by a current limiting resistor.

You would need a footswitch with no LED or an LED with no resistor.

If your current switch has an LED with a resistor you could place a jumper wire across the resistor. You just have to be aware that you would need to remove the jumper to use that switch with the product it was designed for.

Meanwhile, I’ll check availability on our Cyclops footswitch accessory.

Dave

3

Hi Dave,

You nailed it. Both switches have an LED. That explains it.

Thanks!!