Fluctuating volume

Stage & Studio Power Station PS-2
1

I thought I would start a new thread since the title of my previous thread may have been misleading.

When I have my amp plugged into the “amp in” and a cabinet connected to “Speaker out”, everything sounds great for about 5 mins, The volume then diminishes then gets louder then back down.

I don’t have anything else connected to the amp or PS-2.

I have only had the PS-2 for a year or so and never gigged it or put a lot of hours on it.

Is this a tube issue or something else?

2

It could be tube related depending on how drastic the level change is.

Try connecting a jumper instrument cable from the FX loop send to the return. That could help isolate the issue.

Dave

3

I tried the jumper cable…no improvement.

I put in brand new tubes, here is what it sounds like…more like a crackle.

This is amp into PS-2 and speaker cable out to 4x12.

I live in Camarillo, is it possible to drop it off at your shop to assess?

4

Yes, you’re welcome to do that.

Weekdays 11AM to 4PM.

9620 Topanga Canyon Place
Unit D
Chatsworth, 91311

5

Dave,

I dropped off my PS-2 last Friday. Terry mentioned you were out of the office until Wednesday this week.

Just checking to make sure you got it ok.

Thanks,

Roger

6

Hi Roger,

It’s in the repair/evaluation queue here. We’ll get it done as quickly as possible for you.

Thank You,

Terry

7

Hello Guys I Am experiencing the same issue with my PS-2A. ( volume drops after 5- 10 min and FX loop gives me a drastic drop in volume as well ) . The issue here is that I am from Canada ( Montreal ) and I do not know if there is a service point close by that you guys work with. Or will I Have to send it out to US for Repairs

Thank you in advance