I play in a doom metal band, using an MK2 D120 and 2x Fatbottom 412s. I recently picked up a Peavey 800 series booster and 412 cab that I want to add into my setup. Currently I use both 8/4 jacks to power each cab, as directed in the manual.
How can I safely add the booster into this setup? The last thing I want to do is damage my D120.
Pics attached of the booster
Hey Oracles, welcome to the forum!
Connect the D120 FX Send to the PV unbalanced input using an instrument cable. Then you can separately control the volume of the PV amp and cab.
In the event that you get a ground loop induced hum doing this, you can pick up a simple isolation box to cure that.
You can also use the 16 ohm out as a Line Out but ONLY if you have the 8/4 jacks connect to a cab at the same time.
Cheers,
Dave
