Connecting a combo amp to the PS-2A

[dan]

Hey welcome back!

Similar question here

Connection - Soldano Astro 20

Hey Bacon and welcome to the community Don’t know if it’s the combo or head… [image] This jack plug is your combo’s speaker cable, it connects from your amps output to the speaker. So you need to do the following: Unplug all power from the amp and Power Station. Unplug your speaker cable – remember this jack socket, we need it for later… Use a 1/4" jack female to female coupler [image] Connect the female coupler to the jack you just unplugged. Connect a speaker cable from the coup…

I have this type and like it, it’s a mono, never had any problems,

I had a vintage amp once and because I had the parts and a solder iron, I put two neutrik jack sockets on the end of speaker cable. Looked ridiculous, but if you trust your own soldering then that’s a good option .

Neurik have this NA3JJ - Neutrik
But it does not state power handling. The connection will be rated I am just unsure of the internal wiring. However it seems you could open it and wire that up.