No sound in bypass or operate but power amp still works?!?

[dan]

Hi S.McCoy and welcome to the community!

• Does your SLO and D clone combo work when directly connected to their speakers? I just want to check if they are sending a signal.
• You have checked your speaker cables and know they are working – how did you ensure this?
• What happens if you plug into the Line In rather than the FX return?

Here is the Power Station trouble shooting guide. Please go through all the “NO SOUND” steps,

Power Station: Troubleshooting Guide

WON’T TURN ON Make sure AC cord is securely connected at both ends. Verify the power source with something you know works. Check the mains fuse, and replace if necessary. If it blows again, refer to qualified service personnel. NO SOUND Check input cable. Check volume controls. Make sure the amplifier volume and/or gain controls are turned up. Check to see if the effects loop is connected correctly. Check speaker cable to see if it is disconnected or shorted. Make sure that the impedanc…